How To Snowboard Tips : How to Set Up Your Snowboard Bindings with Danny Kass

If y'all desire to set up your snowboard bindings correctly, your stance on a snowboard should be about shoulder width, with approximately 15 degrees of bending on your front bounden and around 0 degrees in the back. Experiment and notice what's most comfy for you, in the end it's individual preference.

What Bindings to Use

The bulk of bindings and boards have standardized mounting systems, and almost all bindings are are compatible. Withal, at that place are mounting variations nearly unremarkably found on Burton boards known as ICS, or The Channel System, too as their proprietary 3-pigsty mounting pattern. That beingness said, the vast majority of major binding manufacturers provide disks that allow mounting to any type of mounting system out there. If ever unsure, consult a local shop, or contact the binding manufacturer to see if they can send you the correct disks to use, or guide yous through the procedure.

What Yous'll Demand to Mount Your Snowboard Bindings

  • #iii Phillips Screwdriver
  • Measuring Tape (optional)
  • Instructions that came with your bindings (too optional, only helpful)

How to Mount Snowboard Bindings Steps

  1. Cull a pair of bindings that fit your foot size and riding style.
    • All binding companies volition accept size charts bachelor to make certain you tin can become dialed in correctly.
  2. Make sure your right binding is in the forepart of the lath, and the left bounden is in the back.
  3. Determine your stance width.
    • It should be comfortable and generally a flake wider than your shoulders.
    • Yous can also use the distance from your kneecap to your heel for a standard opinion width.
    • If you're unsure of where to starting time, try the lath's reference stance first.
    • The reference stance is a suggested spot to mount your bindings that come marked on most snowboards.
  4. Find your hardware bundle which will contain your mounting disks, screws, and washers.
  5. Place your disks in the bindings and brainstorm to dial in your angles.
  6. Rotate the disks so that the reference arrows on the outside of the binding ring line upwardly with the desired degrees references on the mounting deejay.
  7. To start, we suggest mounting your front end binding with fifteen degrees of positive angle.
    • This is a basic starting signal, and it helps open your hips for initiating turns.
  8. Mount your dorsum binding at 0 degrees.
  9. To keep your bindings in identify while you mount them, put one screw and washer in contrary corners of the disk mounting holes and tighten about a quarter of the way
  10. This will ensure your binding stays centered over the holes while yous add the final ii screws and washers
  11. Manus tighten all bolts with a #3 Phillips screwdriver until you experience a strong resistance.
    • We don't suggest using a power drill, since it can potentially over tighten your bolts and impairment the base of your snowboard.
  12. If you want to ride park, make sure y'all center the stance on the lath and add together a fleck of negative angle on the dorsum bounden.
    • This creates a favorable stance for riding switch, known as a "duck" opinion.
  13. As you progress, you can start to experiment with dissimilar mounting preferences
    • Gear up your unabridged stance back from centered position to create a longer olfactory organ and requite more than bladder for powder days.
    • Every bit y'all progress, experiment with your stance and detect whats comfortablemore angle, less angle, wider, narrower, etc.
    • Each adjustment yous brand is designed to fit your riding style to the board and to the conditions.

More How-To Snowboarding Videos and Information

You tin can become a re-create of the entire 20 Tricks "FunDuhMentals" instruction video series in the iTunes store by clicking the link beneath. This three-part series covers board setup, what to know before y'all drib, and the top 12 bones tricks that will help progress your riding. Larn all the snowboarding basics from some of the biggest pros including Danny Kass, Jack Mitrani, Kevin Pearce, Pat Moore, Dan Brisse, and Louif Paradis.

Become TransWorld SNOWboarding'south instructional video "xx Tricks: FunDuhMentals" Hither

how to snowboard tips, how to set up your bindings with danny kass

How to prepare upwards your bindings with Danny Kass. Photo: Chris Wellhausen